Once you have changed the values, click Save Settings icon for this changes to take effect.īelkin International, Inc., including all affiliates and subsidiaries (“Belkin”, “us” or “we”) thanks you for choosing one of our Belkin, Linksys or Wemo products (the “Product”). Local IP Address: Default value used: “ 192.168.1.1” The default value for the IP Address and Subnet Mask are: NOTE: Class A, Class B, and Class C are the three classes of addresses commonly used on IP networks.Ĭlass A, B, and C networks have default masks as shown here: To access the Web Graphical User Interface (GUI), click here.Īt the Web GUI, click on Setup tab as shown in the following screenshot.Ĭlick on Basic Setup tab as shown in the following screen shot.Īt the bottom of the screen, you should be able to see Gateway IP with Local IP Address and Subnet Mask aligned to it. The procedure below shows how you can access the Web User Interface to change your Subnet Maskvalue. However, simply changing the subnet mask requires that all routers and other statically assigned computers be reconfigured and all DHCP clients have renewed their lease obtaining the new parameters. If you have an address range that has run out of available host addresses, you may be able to change the subnet mask to include a larger share of host addresses. However, this method requires you to change all subnet hosts and gateways. It is a recommended procedure for increasing a DHCP scope when the current scope has entirely consumed the current subnet mask. Subnet Masks accompany an IP address and the two values work together. A Subnet Mask contains four bytes (32 bits) and is often written using the same "dotted-decimal" notation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |